Orbital MT433 – Mux-Tee with 433 MHz M & C Channel

Orbital MT433 – Mux-Tee with 433 MHz M & C Channel

10 MHz multiplexer, M&C channel, and bias tee in one

3D Drawing (Solidworks drawing is available on request)


pdf icon Click to download specs & mechanical PDF

Switching Power Supply

PS1 for North America
PS2 for Global

Mechanical Drawing


  • 433 MHz control channel port, -60 to -90 dBm, 50 Ω
  • 11 MHz data channel bandwidth, (19.2 kbs data rate min)
  • Highpass filtered L band: rolloff below 900MHz, flat 950 thru 2100MHz
    Assures DC block to Rx port and 10 MHz port
  • Filtered 10MHz
  • low thru loss from 10 MHz input to LNB
  • Lowpass filtered DC, 4.0A capacity (12 to 48V) standard – for LNBs or transmitters
  • Any combination of 50 Ω and 75 Ω in/out Impedance transforms, (eg. 75 Ω J-1 to 50 Ω J-2)
  • Very low passband ripple and insertion loss
  • Very high Rx port to 10MHz port isolation, no leakage back to rx
  • Superior Input and Output VSWR
  • Will not degrade phase noise performance


  • Will operate with LNBs, BDCs, VSATs, BUCs, and Modems
  • Connectors O ring sealed for weather resistant operation
  • Will not cause loss of lock
  • Will not impair bit error rate


  • Machined from solid aluminum block for strength, stability and endurance
  • Anodized finish for corrosion protection and excellent RF shielding/grounding
  • Excellent shielding and grounding
  • ‘Back O Rack’ mounting bracket for ease of installation and lead dress
  • Fewer cables and connectors yield less signal degradation

SIP Solutions

Systems Interface Products Although Combiners and Oscillators are also SIP products, we have narrowed the definition here to just include Bias Tees, Diplexers, Mux-Tees, TTL Switches, Thru Tees, Dual Power Tees, etc.
Here are standard applications for each of these products. Here’s how to insert 10 MHz, insert DC, extract 10 MHz, block DC, extract DC, multiplex DC L band and 10 MHz, and perform impedance transforms while you do it.

Using a Hi Power Thru Tee to power a BUC Modem has DC power, but not enough to power my new BUC.
4 Way Combiner with 10 MHz Oscillator and Hi Power DC insert. I want to lock several modems to a single 10 MHz Oscillator, and insert high power DC to my BUC.
Orbital 2-way Combiner using 10 MHz from one of the modems and Hi Power Mux-Tee to insert DC power I have a pair of modems, one of which provides a 10 MHz reference, but I don’t have enough power from my modem for my new high power BUC.
Orbital Combiner/Divider stripping out the 10MHz from only one of two modems I have a pair of modems and I need to use the 10 MHz reference from one of them and split it. I need to take the L-Band signal from both modems and combine it with the 10 MHz reference. Now I need to insert DC power for a pair of high power BUCS.
Orbital Combiner/Divider using a MOS 10 MHz Oscillator I need to combine the L-Band signals from a pair of modems with an common, external 10 MHz source, and insert power to a pair of high power BUCs.
Using an Orbital Hi Power Thru Tee to circumvent a divider or switch My modem does not have sufficient DC to power my BUCs, and I can’t switch DC power to the BUC, what to do?
Horizontal/Vertical Polarity 1 for 2 Redundant System We need a system that will provide us with both horizontal and vertical polarities at Ku Band. In addition, the system must offer 1 for 2 redundancy.

More SIP Solutions

Using a Mux-Tee Using an Orbital MT-40 Mux-Tee to multiplex the L-Band, and 10 MHz reference signals with DC power for a BUC.
Using a Bias Tee Using an Orbital MT-40 Mux-Tee as a Bias Tee to insert DC Power to a BUC
Using a Diplexer Using an Orbital MT-40 Mux-Tee as a Diplexer to insert a 10 MHz reference to a BUC
Using Redundant Power Tee Using an Orbital Redundant Power Tee provides inexpensive power supply redundancy.
Using a Thru Tee Using an Orbital Thru Tee to provide a separate DC power supply to the BUC, while passing the 10 MHz signal through from the modem.

How to order

For pricing options please call 1-604-419-8585 or contact us.

Need help?

Harsh environment?

Complicated or unique application?

We’ll work with you to develop custom LNBs and components that meet your needs.

High-performance LNBs and frequency conversion products for the most challenging SATCOM conditions on the planet.


1 (604) 419-8585

1 (604) 419-8561

8652 Commerce Court
Burnaby, BC, Canada  V5A 4N6


Privacy Policy

ISO 9001 Certification


We are members of:

Canadian Association of Defence and Security Industries